ASTM C1396 Gypsum Board Flame Stability Testing Machine Subtotal:
Shop
Showing 265–288 of 414 results
-
Electrical & Electronic
ISO 5660 Cone Calorimeter
Cone Calorimeter is used to collect and record oxygen concentration, temperature, heat release rate, hot flue gas flow rate, sample ignition time and extinction time, total oxygen consumption, mass loss rate, total heat release, CO2 production curve (only for special customized models) etc. It is made according to ISO 5660.
SKU: n/a -
Electrical & Electronic
ISO 834 Fire Damper Vertical Test Furnaces for Building Materials
Fire Damper Vertical Test Furnace is Applicable to building ventilation, air conditioning and smoke exhaust systems, fire dampers, smoke venting valves, exhaust valves etc. It follows test standard of
GB15930-2007 “Fireproof valve for building ventilation and smoke exhaust system”, GB15931 “Test method for smoke exhaust fire valve” and GB/T9978-2008SKU: n/a -
Electrical & Electronic
Laboratory UV Light Sources Accelerated Test Device
Laboratory UV Light Sources Accelerated Test Device is used as the light source in the UVA accelerated aging test box, which can simulate the damage caused by sunlight, rain and dew. It is in line with ASTM G 153, ASTM G 154, ASTM D 4329 and so on.
SKU: n/a -
Electrical & Electronic
Large Combustion Chamber / Wire and Cable Flammability Testing
Large Combustion Chamber / Wire and Cable Flammability Testing Equipment is widely used by wire and cable manufacturers, universities and commodity inspection departments. It complies with UL1581 sect1080.1 ~ 1080.14 standard.
SKU: n/a -
Electrical & Electronic
LCR Measuring Instrument / Digital LCR Meter for Measuring
Basic Accuracy: 0.3 %
Measuring Rate: 3 meas / sec
Correction Function: Open / Short multi – frequency Zeroing
Display Mode: Direct, D %, D ABS
Display: 20 ́ 2 Characters LCD with Back – light
Operation Temperature and Humidity: 0°C 40°C, £ 90%RH
Power Requirements Voltage:SKU: n/a -
-
Electrical & Electronic
Long Service Life Accelerated UV Testing Equipment
Long Service Life Accelerated UV aging Tester is used as the light source in the UVA accelerated aging test box, which can simulate the damage caused by sunlight, rain and dew. It is in line with ASTM G 153, ASTM G 154, ASTM D 4329 etc.
SKU: n/a -
General & Physical Tests
Low & Ultra-Low Temp Cold Chamber Machine (for -0 to -86 C )
- Cold Chamber Size (as per requirement of customer)
- Digital Temperature Indicating controller
- Glass Window on the door. (if required)
- Very high displacement compressor of about 22 per revolution
- Highly efficient refrigerant R404A having a boiling pt. Of -46DegC
- Our freezer does not require a low ambient temp. It can work even at an ambient of 40DegC
- Feed evaporator to improve the refrigeration effect and coeff. Of performance of the system as a whole
- High density PUF of about 60kg/cm3 so as to hold the temperature for a longer time
- Hot discharge is circulated on the mouth of the freezer to prevent cooling losses
- Microprocessor based temperature controller for accurate temperature and longer compressor life.
- Standard compressor of 1 hp with Cascading Refrigeration System
- Copper Capillary of higher wall thickness to last longer
- Uniform capillary distribution on the surface of chamber for faster and uniform cooling within chamber.
- Double door formation (acrylic + normal) for better insulation
- Noise less operations
SKU: n/a -
Electrical & Electronic
Low Temperature Cycle Test Chambers (Temperature-only)
Low Temperature Cycle Test Chambers available in More than 29 models to suit proper environmental test conditions. Low temperature available: A: -20℃, B: -40℃, C: -70℃ , D: -86℃.E:-200℃( liquid nitrogen refrigeration.
SKU: n/a -
Reaction to Fire Testing
Material Smoke Toxicity Hazard Classification Tester | Smoke Density Tester
The Simple Step by Step Classifying a Hazard Determine Process to chemical is hazardous based on its physical hazards, health hazards, and environmental hazards. Test your if the chemicals or consult determine how the above information scientific evidence to classifies the material.
SKU: n/a -
Electrical & Electronic
Material Smoke Toxicity Hazard Classification Tester Steady State Tube
Material Smoke Toxicity Hazard Classification Tester is applicable to the test equipment for smoke toxicity hazard classification of stable materials. The test machine is designed and manufactured in accordance with the standard requirements of GB/T20285-2006 “Material Toxicity Hazard Classification of Materials”.
SKU: n/a -
Electrical & Electronic
Maximum Use Temperature Test Apparatus o
The device is applicable to the evaluation of the maximum use temperature of insulation products such as loosely filled insulation materials, felts, carpets, blocks, plates and prefabricated insulation tubes. It comply with Comply with GB/T17430-1998.
SKU: n/a -
Electrical & Electronic
Micro Control Aircraft Fire Resistance Test Machine
Micro Control Aircraft Fire Resistance Test Machine has standard flame burner, kerosene storage tank, tank pressurization device, thermocouple temperature measurement system, automatic control system and data collection and processing. It is in line with RTCA D0-160G-201026 and CCAR25-R4F Annex F standards.
SKU: n/a -
Electrical & Electronic
Micro Control Multifunctional Vertical Fire Resistance Test Furnace
Micro Control Multifunctional Vertical Fire Resistance Test Furnace complies with GB15930-2007(Fireproof valve for building ventilation and smoke exhaust system). It is applicable to building ventilation, air conditioning and smoke exhaust systems, fire dampers etc.
SKU: n/a -
Electrical & Electronic
Micro Controlled Epiradiateur Thermal Radiation Flame Propagation Tester
Micro Controlled Thermal Radiation Flame Propagation Tester is widely used by manufacturers of railway vehicles, universities and commodity inspection departments. Its design and manufacture meet the requirements of NF P92-501, TB/T2639.1 (Radiation Test Method for Fire Resistance Performance of Railway Vehicle Materials)
SKU: n/a -
Electrical & Electronic
Micro Controlled Resilient Textile and Laminate
Micro controlled resilient textile and laminate is equipment used for the flame retardent performance evaluation of deck coating and flight deck anti skid coating. It is made of a hood, a natural gas burner and a sample holder mounted on a suitable frame.
SKU: n/a
