Electrical & Electronic
Showing 73–96 of 372 results
-
Electrical & Electronic
Building Materials and Products Surface Flame Spread Test Equipment
Building Materials and Products Surface Flame Spread Test Equipment is used for determination of the propagation of flame along the surface of a vertical plate specimen. According to test results materials are classified into four grades. Class 4 materials are highly dangerous and are not allowed to be used as building materials. It Complies with BS476-7.
SKU: n/a -
Electrical & Electronic
Building Materials Difficult Flammability Tester
Building Materials Difficult Flammability Tester / Testing Equipment is suitable for judging whether building materials are flammable or not. Its design, production, inspection and other aspects are in line with the requirements of GB/T8625-2005 standard.
SKU: n/a -
Electrical & Electronic
Cabinet Method Fire Retardant Paints Burning Testing Machine
Cabinet Method Fire Retardant Paints Burning Testing Machine is used for experiments on the fire resistance of veneer-type fire retardant coatings under laboratory conditions. It has simple operation, reasonable structure and accurate in test.
SKU: n/a -
Electrical & Electronic
Cable & Fibre Optic Cable Heat Release and Smoke Production Testing
Cable & Fibre Optic Cable Heat Release and Smoke Production Testing equipment has main parts are combustion chamber, smoke collecting hood, air supply system, standard ladder etc. The equipment follows standard of BS EN 50399:2011.
SKU: n/a -
Electrical & Electronic
Cable & Fibre Optic Cable Heat Release and Smoke Production Testing Equipment
Electrical & ElectronicCable & Fibre Optic Cable Heat Release and Smoke Production Testing Equipment
EN 50399 Cable & Fibre Optic Cable Heat Release and Smoke Production Testing equipment uses imported German incandescent lamp as light source. We also use Oxygen analyzer which is imported from Germany SIEMENS.
SKU: n/a -
Electrical & Electronic
Cable Fault Detector Machine TDR
Cable fault Location system (various technology)
The Cable Fault Locating System COMPAC 32 is used to perform DC high pot test, Pre-location of fault distance with the help of pre-locator unit and
Pin-point underground cable fault in acoustic method with the help of suitable Surge wave receiver and Pin-point sheath faults in power transmission and
distribution networks or service provider companies. Key features Operating Mode Surge, Arc / SIM, DC / Proof Test/ Pre-location and Sheath Fault
Pin-point location of cable faults in Low, Medium and High voltage cables by acoustic method.
Perform DC / Proof test up to 32 kV
DC Test Current 10/20mA
Burn test up to 32 kV – 60mA for short period
Surge Output voltage selectable in three ranges 8, 16 and 32 kV continuously variable
Full energy delivering capacity at each select range.
High Surge energy of 1000 Joules (optional 2000J)
Single Impulse and 1.5, 3 and 6 seconds intervals or as per customer request
Pre-location of cable faults distance with TDR, ICM, SIM/MIM & Decay mode.
Big LCD touchscreen color display.
Maximum measuring pre-location range up to 64km
Sheath fault location up to 8kV – 60mA
Protection Class – IP 54SKU: n/a -
Electrical & Electronic
Cable Fault Pre-Locator
This tester combines both pulse reflecting technology (TDR) & intelligent Bridge testing (Bridge) for measuring the exact fault location such as broken line, cross faults, earthing, poor insulation & poor contact of the lead covered cables also as plastic cables. Cable Fault Pre-locator is capable of giving IR tests in Bridge mode.
SKU: n/a -
-
-
Electrical & Electronic
Charging Pile Cable Torsion Testing Machine
Charging Pile Cable Torsion Testing Machine is suitable for TUV, VDE, UL and other high flexible cable detection requirements. It is used to detect the performance and defects of metal wires under plastic deformation in the repeated torsion test. It is in line with ASTM A938.
SKU: n/a -
Electrical & Electronic
Climatic High Low Temperature Humidity Stability Test Chamber for Food
Climatic High Low Temperature Humidity Stability Test Chamber for Food is in line with requirements of GB5170, 2, 3, 5, 6-95 and other international test standards. It is used to check product stability in low temperature, high temperature, constant humidity and alternating humidity conditions.
SKU: n/a -
Electrical & Electronic
Coating Thickness Gauge
A digital coating thickness gauge (also brought up as a paint meter) is employed to live dry film thickness. Dry film thickness is maybe the foremost critical measurement within the coatings industry thanks to its impact on the coating process, quality and price. Dry film thickness measurements is accustomed evaluate a coating’s expected life, the product’s appearance and performance, and ensure compliance with a bunch of International Standards.
SKU: n/a -
Electrical & Electronic
Comparative Tracking Indices Test Apparatus for Solid Insulating material
Comparative Tracking Indices Test Apparatus for Solid Insulating Materials is suitable for lighting equipment, low-voltage electrical appliances, electrical appliances, machine room, engineering plastics, electrical connections etc. It is also in line with IEC 60112.
SKU: n/a -
-
Electrical & Electronic
Conductor Resistance Fixture / Conductor Resistance Clamp
Conductor Resistance Fixture / Conductor Resistance Clamp has a set of collet and a pair of micro terminals, which can be used to measure the round line. It’s manufacturing and design is in line with IEC 60468.
SKU: n/a -
-
Electrical & Electronic
Conductor Tensile Elongation Test Machine
Conductor Tensile Elongation Test Machine is suitable for the tension and elongation test of copper wire, aluminum wire, aluminum magnesium alloy, iron wire and other metal wires. It is in line with UL, CSA, GB, ADTM, VDE, IEC test standards.
SKU: n/a
