Cable Abrasion Test

Specification Compliance:

1. IEC 60229
2. BS 6724
3. BS 7846
4. Model Number:-D210

In the middle part of the sample, Angular Wedge Assembly as specified in the standard place a length of low carbon steel angle horizontally, at right angles to the cable with its angle edge resting on the cable and its arm symmetrical about the vertical plane.

It has Vertical force is applied the overall diameter of the cable

It has a Counter Meter to measure the number of passes

Digital Timer Set of weights as per standard requirement

Frequently asked questions:-     

What is abrasion testing?

It has The intent of abrasion testing is product data that will reproducibly rank materials in their resistance to scratching abrasion under has specified set of conditions. Abrasion testing is used to test witch the abrasive resistance of solid materials.

Why abrasion test is done?

It has Abrasion test is carried out to test the hardness property which aggregates. The principle of the Los Angeles abrasion test is to find the percentage wear due and relative rubbing action between and aggregate and steel balls used as abrasive charges.