Cable Fault Pre-Locator are generally used in cable manufacturing or cable installation sites for easy detection of short circuit between cores or core to shield as well as for is continuity in a core. The principal of working for such LV Cable Fault Pre-Locator is based on TDR and bridge and Capacitance-resistance of the cores.
Display Readout: Color LCD 480*280
Power Supply: 7.4V Rechargeable Li-ion battery Charging voltage 230V +/-10%, 50Hz, single phase
Continued Operating Time|: 8 hours
Working Temperature: -15~ + 55 degree Celsius RH less than 85%RH.
With 4 GB USB Pen drive
Tests any type of copper telecom and signal cables Measurement maximum 8 km in selectable ranges
Menu-driven simple operation Colour LCD Display (480 x 280 dots)
Automatic testing mode
Range, VOP, and Gain are selected automatically.
With test insulation resistance mega meter it enables and loop resistance.
Six function keys and simple operation.
The manual testing function is also available.
Both pulse reflection and intelligent bridge testing for open, short, or low insulation cable faults.
Continued 8 hours operating time on internal battery
Rugged construction and easy to carry on site
Rechargeable lithium battery with intelligent charger
Display Readout: Colour LCD: 480°280-
Charging time: 3 hours
Power Supply: 7.4V Rechargeable Li-on battery Charging voltage 230V +/10%, 50Hz, single phase.
Continued operating time: 8 hours
Working Temperature: -15°C ~ + 5°C; RH <85%RH.
Dimension: 212 (L) x 170 (W) x 90 (H) mm (approx.)
Storage Temperature: -15°C ~ + 55°C; RH <85%RH.
Weight: 1.20 Kg Net (approx.)
You can also check our Machinery Products.