Electrical & Electronic
Showing 49–72 of 373 results
-
Electrical & Electronic
Automobile Wire or Cable Insulation Sheath Abrasion Resistance Tester
Automobile Wire or Cable Insulation Sheath Abrasion Resistance Tester is suitable for wire and cable industry to scrape and grind the sample at a certain speed until it cracks or breaks, and record the times of scraping and grinding. It is in line with ISO 6722 “Technical Conditions for Cable Ordering of Railway Locomotives and Rolling Stocks – Cable Sheath Scraping and Grinding Test”
SKU: n/a -
Electrical & Electronic
Aviation Wire and Cable Flammability Test Chamber
Aviation Wire and Cable Flammability Test Chamber is in line with ASTM D5025 standard. The time and duration of flame ignition can be adjusted. When the fire time is up to a predetermined time, the fire will be stopped automatically.
SKU: n/a -
-
-
Electrical & Electronic
BS 476-6 Building Materials and Structures Flame Propagation Flammability
Building Materials and Structures Flame Propagation Flammability Tester is mainly used to evaluate the fire performance of indoor wall and ceiling linings, and the results are shown by the flame propagation index. It Comply with BS476-6 and BS476-6.
SKU: n/a -
Electrical & Electronic
Building Constructions and Materials Vertical Fire Resistance Test Furnace
The device consists of fire test furnace, control cabinet, gas system, purification system, sample test stand, gas flow measurement system, temperature measurement system and pressure measurement and control system.
The device can be used to determine the fire resistance characteristics of the frame door, non-frame door, rolling shutter door, the fireproof glass etc.SKU: n/a -
Electrical & Electronic
Building Material and Structure Surface Flame Spread Tester
Building Material and Structure Surface Flame Spread Tester is Applicable to the determination of the propagation of flame along the surface of a vertical plate specimen the results of which are suitable for comparing the fire performance of exposed surfaces of walls or ceilings.
SKU: n/a -
-
Electrical & Electronic
Building Materials and Products Surface Flame Spread Test Equipment
Building Materials and Products Surface Flame Spread Test Equipment is used for determination of the propagation of flame along the surface of a vertical plate specimen. According to test results materials are classified into four grades. Class 4 materials are highly dangerous and are not allowed to be used as building materials. It Complies with BS476-7.
SKU: n/a -
Electrical & Electronic
Building Materials Difficult Flammability Tester
Building Materials Difficult Flammability Tester / Testing Equipment is suitable for judging whether building materials are flammable or not. Its design, production, inspection and other aspects are in line with the requirements of GB/T8625-2005 standard.
SKU: n/a -
Electrical & Electronic
Cabinet Method Fire Retardant Paints Burning Testing Machine
Cabinet Method Fire Retardant Paints Burning Testing Machine is used for experiments on the fire resistance of veneer-type fire retardant coatings under laboratory conditions. It has simple operation, reasonable structure and accurate in test.
SKU: n/a -
Electrical & Electronic
Cable & Fibre Optic Cable Heat Release and Smoke Production Testing
Cable & Fibre Optic Cable Heat Release and Smoke Production Testing equipment has main parts are combustion chamber, smoke collecting hood, air supply system, standard ladder etc. The equipment follows standard of BS EN 50399:2011.
SKU: n/a -
Electrical & Electronic
Cable & Fibre Optic Cable Heat Release and Smoke Production Testing Equipment
Electrical & ElectronicCable & Fibre Optic Cable Heat Release and Smoke Production Testing Equipment
EN 50399 Cable & Fibre Optic Cable Heat Release and Smoke Production Testing equipment uses imported German incandescent lamp as light source. We also use Oxygen analyzer which is imported from Germany SIEMENS.
SKU: n/a -
Electrical & Electronic
Cable Fault Detector Machine TDR
Cable fault Location system (various technology)
The Cable Fault Locating System COMPAC 32 is used to perform DC high pot test, Pre-location of fault distance with the help of pre-locator unit and
Pin-point underground cable fault in acoustic method with the help of suitable Surge wave receiver and Pin-point sheath faults in power transmission and
distribution networks or service provider companies. Key features Operating Mode Surge, Arc / SIM, DC / Proof Test/ Pre-location and Sheath Fault
Pin-point location of cable faults in Low, Medium and High voltage cables by acoustic method.
Perform DC / Proof test up to 32 kV
DC Test Current 10/20mA
Burn test up to 32 kV – 60mA for short period
Surge Output voltage selectable in three ranges 8, 16 and 32 kV continuously variable
Full energy delivering capacity at each select range.
High Surge energy of 1000 Joules (optional 2000J)
Single Impulse and 1.5, 3 and 6 seconds intervals or as per customer request
Pre-location of cable faults distance with TDR, ICM, SIM/MIM & Decay mode.
Big LCD touchscreen color display.
Maximum measuring pre-location range up to 64km
Sheath fault location up to 8kV – 60mA
Protection Class – IP 54SKU: n/a -
Electrical & Electronic
Cable Fault Pre-Locator
This tester combines both pulse reflecting technology (TDR) & intelligent Bridge testing (Bridge) for measuring the exact fault location such as broken line, cross faults, earthing, poor insulation & poor contact of the lead covered cables also as plastic cables. Cable Fault Pre-locator is capable of giving IR tests in Bridge mode.
SKU: n/a -
-