Hot Air Bath

Hot air Bath (Underground, above ground all size possible)

• The gap between the walls is filled up with special grade glass wool for proper
insulation to avoid heat losses.
• Temperature Control, Thermostat (Temperature accuracy +/- 3 Deg C)
• On/Off Control (Temperature accuracy +/- 2 Deg C)
• PID Control (Temperature accuracy +/- 1 Deg C)
• Microprocessor control (Temperature accuracy +/- 0.5 Deg C
• Please specify the kind of controller and accuracy required at the time of
ordering.
• Water Circulation
• Water circulation using separate motor or stirrer.
• Elements
• Heating elements are made of high quality heaters which are put inside the
water bath and placed at the bottom of the bath

Reviews

There are no reviews yet.

Be the first to review “Hot air Bath (Underground, above ground all size possible)”

Related products

  • Hot air oven
    General & Physical Tests

    Hot air oven (With or without Air change)

    Our Ovens are sturdy, with double walled construction. Inner chamber made of
    ALUMINIUM or STAINLESS-STEEL sheet. Outer chamber is made of stainless steel
    or galvanized steel or mild steel sheet and are duly powder coated.
    The gap between the walls is filled up with special grade glass wool for proper
    insulation to avoid heat losses. Inner chamber has ribs for placing the shelves at
    convenient …

    ?add-to-cart=140
  • Shore A
    General & Physical Tests

    Shore A and D – Hardness Test

    The hardness tester is used for understanding the suitability of plastic compound material such as PVC, LSZH, EVA, PE, etc.

    The test itself becomes very important when it is crucial to decide the temperature profile and tensile strength required for the product in the design phase. The hardness of the compound also determines flexibility of cable up to some extent.

    800€

    ?add-to-cart=426
  • Profile projector CQ-64
    Automated Testing , General & Physical Tests

    Automatic profile projector for cable

    Automatic profile projector for cable used in Cable Dimension measurement of any shape of the cable. Available with Accredited calibration master, color measurement, from 36 mm to 108 mm diameter samples.

    IEC-60502-1 and EN 50525 describes the requirement of exact dimension measurement of the insulation, inner jacket and outer jacket of a cable and it’s core.

    Where you actually lose money?

    • Having …

    15.000€

    ?add-to-cart=443
  • Cold bend test tools
    General & Physical Tests

    Cold bend and impact test for cables

     IEC 60811-504 describes the cold bend test method for cables under low temperatures. The cold bend test on cable is only possible upto a maximum diameter of 12.5mm. The test is mainly conclusive to understand the flexibility and strength of plastic used over cable under low temperatures.

    Whereas cold impact test on cables is performed according to IEC 60811-506. This test …

    1.300€

    ?add-to-cart=802