Natural Gas Safety Valve (Socket)
<p class="stock in-stock"></p>
Natural gas safety valve with a thermal device and quick connection. Available with a steel safety device (resistant up to 925 degrees), and with the brass safety device (resistant up to 650 degrees).
Also available without a thermal safety device.
Related products
-
General & Physical Tests
Hot Air Oven (With or without Air change)
0 out of 5(0)Our Ovens are sturdy, with double walled construction. Inner chamber made of
ALUMINIUM or STAINLESS-STEEL sheet. Outer chamber is made of stainless steel
or galvanized steel or mild steel sheet and are duly powder coated.
The gap between the walls is filled up with special grade glass wool for proper
insulation to avoid heat losses. Inner chamber has ribs for placing the shelves at
convenient levels. Supplied with 2 or 3 removable shelves. The oven door is mounted
on heavy hinges with a handle. Door is duly insulated .
Temp control uses Thermostat ,On/Off Control ,PID Control ,Microprocessor control
*Please specify the kind of controller and accuracy required at the time of ordering.SKU: n/a -
General & Physical Tests
Horizontal Cold Chamber up to -86 deg
0 out of 5(0)Techtrivial designs and develop many ranges of cold chambers for cable and plastic compounding industry. Our range goes from -23 Degree Celsius to -86 degree Celsius where you can test not only servo cables with -15 degree Celsius operating temperature but also Arctic grade cables up to -86 degree Celsius.
SKU: n/a -
General & Physical Tests
Cold Elongation Testing Machine as per BS EN 60811-505 & IEC 60811-505
0 out of 5(0)Cold Elongation test as per BS EN 60811-505 or IEC 60811-505from Tech trivial is a machine all fit inside with automatic elongation apparatus fit inside the cold chamber. The operator easily prepare sample and fix it before test is started and without opening the door thanks to HMI display and controller. High Quality loadcell and software is also provided with the equipment to make reporting easier and accurate with high precision.
Software Features:
- Full Machine Control, Start/Stop Elongation, Home Position
- Pre-programmable Sample Test Types removing the hassle of entering Sample Details and Type every time
- Display of Load Applied, Displacement and Temperature
- Speed Control to vary speed as per test requirement
- Simultaneous LIVE graph visibility (Load v/s Displacement) (Stress v/s Strain)
- Selectable Report formats to suit every client and test specific needs
- Tabular Data for Test with Graph recording for in-view software
SKU: n/a -
General & Physical Tests
Hot Pressure Deformation Test Tool as per IEC 60811-508
0 out of 5(0)Hot deformation test is also called a hot pressure test is an acceptance test in order to assess high-temperature resistance of the material to deformation. Thermoplastics tend to deform under high temperatures and small damage during movement or under installation to cable, can cause a puncture or cut of insulation. This could result in the circuit break down shutting down the entire system.
According to the famous test institute of Germany, it was said that the most failing test for HO5-HO7V K cables is this test. In order to achieve a high speed of extrusion, manufacturers tend to inadvertently ignore the impact of compound degradation.SKU: n/a