Natural Gas Safety Valve (Socket)
<p class="stock in-stock"></p>
Natural gas safety valve with a thermal device and quick connection. Available with a steel safety device (resistant up to 925 degrees), and with the brass safety device (resistant up to 650 degrees).
Also available without a thermal safety device.
0€
Related products
-
General & Physical Tests
Hot Air Bath (Underground, Above Ground all Size Possible)
0 out of 5(0)• The gap between the walls is filled up with special grade glass wool for proper
insulation to avoid heat losses.
• Temperature Control, Thermostat (Temperature accuracy +/- 3 Deg C)
• On/Off Control (Temperature accuracy +/- 2 Deg C)
• PID Control (Temperature accuracy +/- 1 Deg C)
• Microprocessor control (Temperature accuracy +/- 0.5 Deg C
• Please specify the kind of controller and accuracy required at the time of
ordering.
• Water Circulation
• Water circulation using separate motor or stirrer.
• Elements
• Heating elements are made of high quality heaters which are put inside the
water bath and placed at the bottom of the bathSKU: n/a -
General & Physical Tests
Cold Elongation Testing Machine as per BS EN 60811-505 & IEC 60811-505
0 out of 5(0)Cold Elongation test as per BS EN 60811-505 or IEC 60811-505from Tech trivial is a machine all fit inside with automatic elongation apparatus fit inside the cold chamber. The operator easily prepare sample and fix it before test is started and without opening the door thanks to HMI display and controller. High Quality loadcell and software is also provided with the equipment to make reporting easier and accurate with high precision.
Software Features:
- Full Machine Control, Start/Stop Elongation, Home Position
- Pre-programmable Sample Test Types removing the hassle of entering Sample Details and Type every time
- Display of Load Applied, Displacement and Temperature
- Speed Control to vary speed as per test requirement
- Simultaneous LIVE graph visibility (Load v/s Displacement) (Stress v/s Strain)
- Selectable Report formats to suit every client and test specific needs
- Tabular Data for Test with Graph recording for in-view software
SKU: n/a -
General & Physical Tests
Cold Bend Test | Cold Impact Test
0 out of 5(0)IEC 60811-504 describes the cold bend test method for cables under low temperatures. The cold bend test on cable is only possible upto a maximum diameter of 12.5mm. The test is mainly conclusive to understand the flexibility and strength of plastic used over cable under low temperatures.
Whereas cold impact test on cables is performed according to IEC 60811-506. This test is mainly designed to simulate the plastic’s capacity to resist mechanical shock under cold environment.Here from a certain height, mandrels of specific weight are dropped on the cable.
SKU: n/a