Natural Gas Safety Valve (Socket)
<p class="stock in-stock"></p>
Natural gas safety valve with a thermal device and quick connection. Available with a steel safety device (resistant up to 925 degrees), and with the brass safety device (resistant up to 650 degrees).
Also available without a thermal safety device.
Related products
-
Automated Testing, General & Physical Tests
Universal Tensile Strength Testing Machine for Plastics
0 out of 5(0)Universal tensile test machine are largely used as cable and plastic test equipment. The tester can complete one test with a simple five-step operation: select the existing test method, input the sample size, install the sample, start the test, and print the report. There two models with different variants of force as per the requirements of customers.
- Single column UTM invariants from 0.5KN to 10KN.
- Dual column UTM invariants from 1KN to 15KN.
SKU: n/a -
General & Physical Tests
Hot Air Bath (Underground, Above Ground all Size Possible)
0 out of 5(0)• The gap between the walls is filled up with special grade glass wool for proper
insulation to avoid heat losses.
• Temperature Control, Thermostat (Temperature accuracy +/- 3 Deg C)
• On/Off Control (Temperature accuracy +/- 2 Deg C)
• PID Control (Temperature accuracy +/- 1 Deg C)
• Microprocessor control (Temperature accuracy +/- 0.5 Deg C
• Please specify the kind of controller and accuracy required at the time of
ordering.
• Water Circulation
• Water circulation using separate motor or stirrer.
• Elements
• Heating elements are made of high quality heaters which are put inside the
water bath and placed at the bottom of the bathSKU: n/a -
General & Physical Tests
Hot Pressure Deformation Test Tool as per IEC 60811-508
0 out of 5(0)Hot deformation test is also called a hot pressure test is an acceptance test in order to assess high-temperature resistance of the material to deformation. Thermoplastics tend to deform under high temperatures and small damage during movement or under installation to cable, can cause a puncture or cut of insulation. This could result in the circuit break down shutting down the entire system.
According to the famous test institute of Germany, it was said that the most failing test for HO5-HO7V K cables is this test. In order to achieve a high speed of extrusion, manufacturers tend to inadvertently ignore the impact of compound degradation.SKU: n/a -
General & Physical Tests
Shore A and D – Hardness Tester
0 out of 5(0)The hardness tester is used for understanding the suitability of plastic compound material such as PVC, LSZH, EVA, PE, etc.
The test itself becomes very important when it is crucial to decide the temperature profile and tensile strength required for the product in the design phase. The hardness of the compound also determines flexibility of cable up to some extent.
SKU: n/a