Natural Gas Safety Valve (Socket)
<p class="stock in-stock"></p>
Natural gas safety valve with a thermal device and quick connection. Available with a steel safety device (resistant up to 925 degrees), and with the brass safety device (resistant up to 650 degrees).
Also available without a thermal safety device.
Related products
-
General & Physical Tests
Thermal Stability Test | Thermal Balance Test
0 out of 5(0)Thermal Stability Test is used for materials like wire, cable, soft PVC, plastic insulating sheath, etc. It is tested at 200 Degrees Celsius ± 0.5 Degrees Celsius. It is made according to GB/T2951.7-1997 standards.
It comes with accessories included :
- test tubes as per IEC 60811-405
- PH litmus paper
SKU: n/a -
General & Physical Tests
Multi Cell Ageing Oven (IEC & UL2556 Compliant)
0 out of 5(0)Multicell Ageing Ovens (with or Without HMI-PLC control)
Each Cell is a complete instrument in itself i.e., fitted with individual Temp. Indicating Controller, Air Flow Meter, Air temperature controller and an
Hour Meter. This enables the user to test different type of samples at desired temperature and duration, depending upon test requirement of end users
& testing authorities.
The instrument consists of the following:
• Double walled chamber with inside chamber of thick aluminum sheet. Size of the chamber is 10 cm x 30 cm
• Digital Temp. Indicating Controller with sensor. Temp. range 0-200 ± 2 o C
• Digital Flow meter for monitoring the volume of air passing through the chamber.
• Air inlet nozzle for the airline or air compressor.
• Specially Designed heaters to heat the air before it enters the cell
• Separate temperature controllers for air temperature control
• Air turbulence fan with motor to rotate at 60 RPM (Air source has to be provided by User)
• Specially designed cover to hold three to five test samples in each chamber.
• Timer System to record the total time of test.SKU: n/a -
General & Physical Tests
Copper Purity Test Apparatus
0 out of 5(0)Copper Purity Test Apparatus is used to test the purity or percentage of Copper in a sample. The test itself is very important when it comes to determining conductor resistivity and conductivity. Many cases had have been seen when a micron of CU more has costed companies in millions for years. And many companies are though working upon copper optimization projects still they miss the lass mile of fine-tuning the process and product and 6 sigma level. All because the CU is not as pure as you are considering in your theoretical calculations. For more support you might get in touch with us on the topic, we provide free consultation on CU optimization projects.
SKU: n/a