Xenon Arc Test or UV Weathering Test as per ISO 4892-2 & 3 Subtotal:
General & Physical Tests
Natural Gas Safety Valve (Socket)
Natural gas safety valve with a thermal device and quick connection. Available with a steel safety device (resistant up to 925 degrees), and with the brass safety device (resistant up to 650 degrees).
Also available without a thermal safety device.
0€
CompareRelated products
-
General & Physical Tests, Machinery, Tools & Cable Components
Multi Die – Hydraulic Press Machine for Making Sample Molds
General & Physical Tests, Machinery, Tools & Cable ComponentsMulti Die – Hydraulic Press Machine for Making Sample Molds
A hydraulic press is a multi-use device as it can be used to mold the plastic samples for several testing requirements as well as day to day inspection such as Color matching tabs can be made with it, Limiting oxygen index test samples as per ISO 4589 can be prepared. The use of it is quite simple, but the granules on the dies of expected shape and press it on prescribed temperature, and within some minutes you get your sample as required.
SKU: n/a -
General & Physical Tests
Multi Cell Ageing Oven (IEC & UL2556 Compliant)
Multicell Ageing Ovens (with or Without HMI-PLC control)
Each Cell is a complete instrument in itself i.e., fitted with individual Temp. Indicating Controller, Air Flow Meter, Air temperature controller and an
Hour Meter. This enables the user to test different type of samples at desired temperature and duration, depending upon test requirement of end users
& testing authorities.
The instrument consists of the following:
• Double walled chamber with inside chamber of thick aluminum sheet. Size of the chamber is 10 cm x 30 cm
• Digital Temp. Indicating Controller with sensor. Temp. range 0-200 ± 2 o C
• Digital Flow meter for monitoring the volume of air passing through the chamber.
• Air inlet nozzle for the airline or air compressor.
• Specially Designed heaters to heat the air before it enters the cell
• Separate temperature controllers for air temperature control
• Air turbulence fan with motor to rotate at 60 RPM (Air source has to be provided by User)
• Specially designed cover to hold three to five test samples in each chamber.
• Timer System to record the total time of test.SKU: n/a -
General & Physical Tests
Hot Pressure Deformation Test Tool as per IEC 60811-508
Hot deformation test is also called a hot pressure test is an acceptance test in order to assess high-temperature resistance of the material to deformation. Thermoplastics tend to deform under high temperatures and small damage during movement or under installation to cable, can cause a puncture or cut of insulation. This could result in the circuit break down shutting down the entire system.
According to the famous test institute of Germany, it was said that the most failing test for HO5-HO7V K cables is this test. In order to achieve a high speed of extrusion, manufacturers tend to inadvertently ignore the impact of compound degradation.SKU: n/a -
General & Physical Tests
Horizontal Cold Chamber up to -86 deg
Techtrivial designs and develop many ranges of cold chambers for cable and plastic compounding industry. Our range goes from -23 Degree Celsius to -86 degree Celsius where you can test not only servo cables with -15 degree Celsius operating temperature but also Arctic grade cables up to -86 degree Celsius.
SKU: n/a
