Natural Gas Safety Valve (Socket)
<p class="stock in-stock"></p>
Natural gas safety valve with a thermal device and quick connection. Available with a steel safety device (resistant up to 925 degrees), and with the brass safety device (resistant up to 650 degrees).
Also available without a thermal safety device.
Related products
-
General & Physical Tests
Thermal Stability Test | Thermal Balance Test
0 out of 5(0)Thermal Stability Test is used for materials like wire, cable, soft PVC, plastic insulating sheath, etc. It is tested at 200 Degrees Celsius ± 0.5 Degrees Celsius. It is made according to GB/T2951.7-1997 standards.
It comes with accessories included :
- test tubes as per IEC 60811-405
- PH litmus paper
SKU: n/a -
General & Physical Tests
Hot Pressure Deformation Test Tool as per IEC 60811-508
0 out of 5(0)Hot deformation test is also called a hot pressure test is an acceptance test in order to assess high-temperature resistance of the material to deformation. Thermoplastics tend to deform under high temperatures and small damage during movement or under installation to cable, can cause a puncture or cut of insulation. This could result in the circuit break down shutting down the entire system.
According to the famous test institute of Germany, it was said that the most failing test for HO5-HO7V K cables is this test. In order to achieve a high speed of extrusion, manufacturers tend to inadvertently ignore the impact of compound degradation.SKU: n/a -
General & Physical Tests
Shore A and D – Hardness Tester
0 out of 5(0)The hardness tester is used for understanding the suitability of plastic compound material such as PVC, LSZH, EVA, PE, etc.
The test itself becomes very important when it is crucial to decide the temperature profile and tensile strength required for the product in the design phase. The hardness of the compound also determines flexibility of cable up to some extent.
SKU: n/a -
Automated Testing, General & Physical Tests, Machinery
Optical Profile Projector for cable
0 out of 5(0)We have all range of Profile projectors suitable for cable and automotive manufacturing sector. Market is flooded with inaccurate and camera based profile projectors that are actually not compliant with Vision systems but still expansive as them.
Automatic profile projector for cable used in Cable Dimension measurement of any shape of the cable. Available with Accredited calibration master, color measurement, from 36 mm to 108 mm diameter samples.IEC-60502-1 and EN 50525 describes the requirement of exact dimension measurement of the insulation, inner jacket and outer jacket of a cable and it’s core.
Where you actually lose money?
- Having higher Insulation wall thickness due to the operator’s running safety margin
- Ovality of extrusion head setting causes the inhomogeneous spread of compound over the conductor.
- Due to higher core diameter, each next process of cable manufacturing such as stranding, taping, braiding, armoring, shielding, inner sheathing, outer jacketing takes a minimum of 0.05% to 3% of extra material.
- An average-sized Cable manufacturer who consumes 10 Million euros of plastics per year losses around 300.000 € just because of non-optimized dimension of cables.
We also supply all the measuring components calibrated by NABL accredited master instruments so that accuracy and uncertainty are never a concern for our clients.
SKU: n/a