Natural Gas Safety Valve (Socket)
<p class="stock in-stock"></p>
Natural gas safety valve with a thermal device and quick connection. Available with a steel safety device (resistant up to 925 degrees), and with the brass safety device (resistant up to 650 degrees).
Also available without a thermal safety device.
0€
Related products
-
General & Physical Tests
Thermal Stability Test | Thermal Balance Test
0 out of 5(0)Thermal Stability Test is used for materials like wire, cable, soft PVC, plastic insulating sheath, etc. It is tested at 200 Degrees Celsius ± 0.5 Degrees Celsius. It is made according to GB/T2951.7-1997 standards.
It comes with accessories included :
- test tubes as per IEC 60811-405
- PH litmus paper
SKU: n/a -
General & Physical Tests
100L High Temperature Constant Temperature Oil Bath
0 out of 5(0)100L High Temperature Constant Temperature Oil Bath is suitable for oil resistance test of plastics such as enameled wire and insulating covering. The test piece is immersed in the test oil at a predetermined temperature, and after a certain period of time tensile residual value is measured. It is in line with GB/T 2951 , GB/T 5023, GB/T 5013, UL, VDE, CSA, JIS and other standards.
SKU: n/a -
Automated Testing, General & Physical Tests
Universal Tensile Strength Testing Machine for Plastics
0 out of 5(0)Universal tensile test machine are largely used as cable and plastic test equipment. The tester can complete one test with a simple five-step operation: select the existing test method, input the sample size, install the sample, start the test, and print the report. There two models with different variants of force as per the requirements of customers.
- Single column UTM invariants from 0.5KN to 10KN.
- Dual column UTM invariants from 1KN to 15KN.
SKU: n/a -
General & Physical Tests
Hot Pressure Deformation Test Tool as per IEC 60811-508
0 out of 5(0)Hot deformation test is also called a hot pressure test is an acceptance test in order to assess high-temperature resistance of the material to deformation. Thermoplastics tend to deform under high temperatures and small damage during movement or under installation to cable, can cause a puncture or cut of insulation. This could result in the circuit break down shutting down the entire system.
According to the famous test institute of Germany, it was said that the most failing test for HO5-HO7V K cables is this test. In order to achieve a high speed of extrusion, manufacturers tend to inadvertently ignore the impact of compound degradation.SKU: n/a