Small Scale Evaluation of Fire Retardant Paints Flammability Tester
<p class="stock in-stock"></p>
Small Scale Evaluation of Fire Retardant Paints Flammability Tester is suitable for experiment on flame propagation charecteristics of facing fire retardant coating under laboratory condition.
Specifications:-
Warranty:-1 year, 1 Year
Certification:-UL
Material:-SUS 304 Stainless Steel
Power supply:-AC220 (±10%) V/50HZ
Model Number:-D251
Power:-Electronic
Customized support:-OEM, ODM
Test station:-1 station
Application:-Paints
Standard:-ASTM D3806
Control cabinet size:-L480 * W320 * H245 mm
Tunnel furnace size:-L610 * W250 * H640 mm
Gas flow:-100 ~ 1000 ml/min
| Technical parameters | |
| Test station | 1 station |
| Power supply | AC220 (±10%) V/50HZ, total power is 100W. |
| Sample size | L600mm * W90mm, thickness of 5mm, the surface is smooth and glossy. |
| Burner | A gas burner with a top diameter of 20 mm and a height of 200 mm with an adjustable air suction hole. |
| Combustion gas source | Natural gas, liquefied petroleum gas or gas |
| Cover | L600 x W90 mm, thickness 10 mm |
| Asbestos standard board | The size is 600mm long, 90mm wide and 6mm~8mm thick. |
| Oak tree standard board | Size is 600mm long, width 90mm, thickness 8mm ~ 10mm, its air dry density is (0.7 ~ 0.85) g/cm2. |
| Gas flow | 100 ~ 1000 ml/min can be adjusted |
| Bunsen burner flame temperature | 900℃±20℃ |
| Tunnel furnace size | L610 x W250 x H640 mm |
| Control cabinet size | L480 x W320 x H245 mm |
Frequently Asked Questions:-
What is sat d3806 small-scale evaluation of fire retardant paints test?
It determines the protection a coating affords its substrate, and the comparative burning characteristics of coatings by evaluating the flame spread over the surface when ignited under controlled conditions in a small tunnel
What is a flammability test?
Flammability testing determines how easily a material or finished product will ignite or burn when exposed to or used near fire or heat.
Related products
-
-
Electrical & Electronic
IEC61034 Wire and Cable Smoke Density Test Chamber
Wire and Cable Smoke Density Test Chamber is used for determination of smoke density of cables and optical cables burning under specific conditions. It is designed and manufactured according to GB/T17651.1-2-1998 standard.
SKU: n/a -
Electrical & Electronic
ISO 5659 Plastic Smoke Density Measuring Instrument
Plastic Smoke Density Measuring Instrument Smoke Density Tester is suitable for measuring the specific optical density of the smoke produced during the combustion of plastics. It is in line with standard GB/T8323.2-2008 “Plastic Smoke Generation-Part 2: Test Method for Measuring Smoke Density by Single Chamber Method”.
SKU: n/a -
Electrical & Electronic
Continuity Voltage Tester
In Cable manufacturing at the final stage of testing, Continuity test is a standard practice and should be carried on each conductor. It is better to conduct Continuity test before HV test so that further damage of cable can be avoided in case the continuity is not shown by the conductor cores.
SKU: n/a
