IEC60811 4800L Insulated Constant Temperature Water Tank
<p class="stock in-stock"></p>
No description
IEC60811 4800L Insulated Constant Temperature Water Tank
Specifications:-
Customized support:-OEM, ODM
Warranty:-1 Year
Temperature stability:-< 1.5℃
Temperature control range:-0 ~ 98 ℃
Power:-Electronic
Material:-SUS 304 Stainless Steel
Inner dimension:-L4000 * W1200 * H1000 mm
Electric heating power:-1600 W
Model Number:-D429
Outer dimension:-L4350 * W1250 * H1150 mm
Standard:-IEC60811
Input voltage:-220V / 50Hz
Product Description
IEC60811 4800L Insulated Constant Temperature Water Tank
Application:-
This water tank is resistant it is used together with the test of insulation voltage of with insulation resistance tester and withstands and withstands used for electric wires in water, and voltage test.
Standards:-
Meets IEC60811-1-3,UL1581-2006 standards
| Parameters:- | |
| Inner dimension | L4000 * W1200 * H1000 mm |
| Outer dimension | L4350 * W1250 * H1150 mm |
| Temperature control range | 0 ~ 98℃ |
| Temperature stability | < 1.5℃ |
| Electric heating power | 1600 W |
| Input voltage | 220V / 50Hz |
| Material | Electrostatic paint outside, stainless steel inside |
| The above dimensions are only example | Can be to customer requirements customized according |
Frequently Asked Questions:-
What is IEC 60811?
It describes general that are applicable given in the particular parts, to all the methods unless otherwise requirements and considerations test specified.
What is the constant temperature of the water?
Economical can be with 0.1°C precision and +/- 0.2°C controlled constant temperature offer superior baths temperatures as high as 100°C (60°Cat control, range, and uniformity Bath fluids temperature water without cover) uniformity.
How does a water bath maintain a constant temperature?
Example: You 70c, heat the water up and put it in wanting the water to be at a constant the main container if it’s too vice versa. Once the pour hot water until it goes temperature drops by a couple of degrees back up to 70c.
What is a temperature bath?
A temperature for more calibration bath provides baths calibration of temperature precise of PRTs, SPRTs, and liquid in glass (LIG) thermometers. Davis of temperature for instruments offers a selection of equipment.
You can also check out our more Machinery Products.
Related products
-
Electrical & Electronic
ISO 5659 Plastic Smoke Density Measuring Instrument
Plastic Smoke Density Measuring Instrument Smoke Density Tester is suitable for measuring the specific optical density of the smoke produced during the combustion of plastics. It is in line with standard GB/T8323.2-2008 “Plastic Smoke Generation-Part 2: Test Method for Measuring Smoke Density by Single Chamber Method”.
SKU: n/a -
Electrical & Electronic
Cable Fault Pre-Locator
This tester combines both pulse reflecting technology (TDR) & intelligent Bridge testing (Bridge) for measuring the exact fault location such as broken line, cross faults, earthing, poor insulation & poor contact of the lead covered cables also as plastic cables. Cable Fault Pre-locator is capable of giving IR tests in Bridge mode.
SKU: n/a -
Electrical & Electronic
IEC60754 Intelligent Halogen Acid Gas Release Determination Test
Intelligent Halogen Acid Gas Release Determination Test Device is used to determine the total halogen acid gas of low halogen and halogen-free flame retardant cable and to measure the acidity of the gas by measuring the PH value and conductivity. It in line with IEC60754 standard.
SKU: n/a -
Electrical & Electronic
Continuity Voltage Tester
In Cable manufacturing at the final stage of testing, Continuity test is a standard practice and should be carried on each conductor. It is better to conduct Continuity test before HV test so that further damage of cable can be avoided in case the continuity is not shown by the conductor cores.
SKU: n/a
