Wire or Cable Insulation Abrasion Resistance Tester
<p class="stock in-stock"></p>
Wire or Cable Insulation Abrasion Resistance Tester is used to test the wear resistance and durability of the insulation skin of communication cable under the factor of applied external force. It is in line with standard GB/T25085-2010.
Specifications:-
Counting range:-0 ~ 99999 arbitrary settings
Steel needle diameter:-0.6 ± 0.05 mm
Work power supply:-220V, 50HZ
Warranty:-1 Year
Scratch speed:-60 ± 2 cycles/min
Power:-Electronic
Application:-Wire & Cable
Model Number:-D555
Standard:-JASO D618
Reciprocating Route:-10 – 12 mm
Product Description
ISO 6722 Wire or Cable Insulation Abrasion Resistance Tester
- Application:-
This machine is mainly and durability of the insulation used to test the wear resistance skin of applied external force. Meet the 9.3.2 test communication cable under requirements in standard the factor of standard GB/T25085-2010.
| 2. Main Parameters:- | |
| Steel needle diameter | 0.6 ± 0.05 mm; |
| Reciprocating Route | 10 – 12 mm |
| Scratch speed | 60 ± 2 cycles/min |
| Counting range | 0 ~ 99999 arbitrary settings |
| Weight | 132g, 400g, 432g, 700g, 732g, 1N, 2N, 3N, 4N, 5N, 10N, 20N, 30N, 40N, 50N, 60N, 106 N, 155N, 210N, 270N, 340N |
Frequently Asked Questions:-
What do you mean by ISO?
International Standardization independent ISO (International Organization for Standardization) is an Organization the quality, non-governmental, international for that develops standards to ensure of products, services, and organization safety and efficiency systems.
What is ISO 6722?
It specifies the for single-core 60 V cables in road system voltage is equal requirements for vehicle applications where the nominal use to or intended dimensions, test methods, and less than (60 V d.c. or 25 V a.c.).
What is the abrasion resistance test?
Abrasion testing is of solid products in their resistance to scratching materials. The intent of abrasion used to test the abrasive resistance testing is to abrasion data rank materials under a specified that will reproducibly set of conditions.
Related products
-
Electrical & Electronic
Cable Fault Pre-Locator
This tester combines both pulse reflecting technology (TDR) & intelligent Bridge testing (Bridge) for measuring the exact fault location such as broken line, cross faults, earthing, poor insulation & poor contact of the lead covered cables also as plastic cables. Cable Fault Pre-locator is capable of giving IR tests in Bridge mode.
SKU: n/a
