Scrape Abrasion Test
<p class="stock in-stock"></p>
This is Scrap Abrasion Tester. This test is designed to abrade the surface of wire or cable insulation in both directions along the longitudinal axis of the specimen.
Scrape Abrasion Test Specification Compliance:
- Model Number:-D215
A minimum distance of testing point and testing terminal
Bidirectional stroke>10mm
Moving frequency? 50~60times/min
Test time? 4times? 4 digits arithmometer
Weights supplied as per requirement
Length of test piece approx
Frequently asked questions:-
What is the Scrape Abrasion Test?
The surface of this test is designed directions along to abrade of wire or cable insulation in both the longitudinal axis of the specimen.
You can also check out our Machinery Products.
Related products
-
Electrical & Electronic
IEC 60695 Horizontal and Vertical Flammability Testing Equipment For Plastics
Electrical & ElectronicIEC 60695 Horizontal and Vertical Flammability Testing Equipment For Plastics
Horizontal and Vertical Flammability Testing Equipment For Plastics is suitable for testing the resistance of plastics and their plastic parts to spread combustion under the condition of flame combustion. It is in line with standard requirements of GB/T2408, GB13488, ISO1210 and UL94.
SKU: n/a -
Electrical & Electronic
Cable Fault Pre-Locator
This tester combines both pulse reflecting technology (TDR) & intelligent Bridge testing (Bridge) for measuring the exact fault location such as broken line, cross faults, earthing, poor insulation & poor contact of the lead covered cables also as plastic cables. Cable Fault Pre-locator is capable of giving IR tests in Bridge mode.
SKU: n/a -
Electrical & Electronic
Building Material and Structure Surface Flame Spread Tester
Building Material and Structure Surface Flame Spread Tester is Applicable to the determination of the propagation of flame along the surface of a vertical plate specimen the results of which are suitable for comparing the fire performance of exposed surfaces of walls or ceilings.
SKU: n/a
