Test chamber:-385(H) * 204(W) * 360(D) mm
Gas:-Accuracy of 2%, 0.5 ~ 5 L/min
Flow meter:-300 L/h
Material:-SUS 304 Stainless Steel
Application:-Automobile Fuel Pipe
Power supply:-220V 50Hz
Automobile fuel pipe fire resistance test machine complies with the British MG Rover Roosevelt Group Engineering Standard 30MS401 “Fuel Hose Fire” and SAE J2027 “Automobile Pipe Shield” test standard, suitable for many fuel pipe combustion endurance tests
1 )Outer chamber is SUS304 stainless steel
2) Test chamber volume: 385mm (height) * 204mm (width) * 360mm (deep)
3) The test chamber is equipped with a throttle valve, there is a tempered glass observation window in front.
1) Burning time: 0~99.99/H/M/S arbitrarily set, accurate to 0.1S, origin: Taiwan
2) Flameout time: 0~99.99/H/M/S arbitrarily set, accurate to 0.1S, origin: Taiwan
3) Automatic ignition function
4 Test chamber volume: width x height x depth: 330 x 550 x 330mm
1)Intelligent digital pressure control table, control range: +200Kpa ~ -100KPa, control accuracy: 0.1KPa, origin: Taiwan
2) Tube pressure gauge
3) Set of sealing devices
4) One air compressor (customer-supplied)
5) Set of clamp pipe fixing test pipe device
Frequently Asked Questions:-
What is Gasoline Fuel Line?
A pipe that carries gasoline to equipment dirt line, gas line Fuel a engine; “the in motor vehicle a wouldn’t gasoline from a tank – or clogged the start because system car gas line” petrol aircraft that delivers fuel to the engine.
What type of hose is used for gasoline?
Most fuel line is cords with nylon gasoline, nitrile ethanol, strengths dared fuel for made of black This that for is to 25 psi, beyond diesel, you between the line is good supporting hose need typically capable biodiesel, up EFI hose. Stan pressures of layers and oil.
What is Tubing Fire Resistance Test?
The test is performed fire must seal period the result in hot gases igniting of time maintenance integrity and insulation during of a determined not to burn through, neither to check on the non-fire side.
How do you test fire resistance?
The standard method resistance test for a period to the specimen period of the Fire equal to one duplicate subjected Endurance states that: “a fire exposure is then immediately but the impact, specimen [is] subjected to a half of the, not for more than one hour.” The cooling and erosion effect of a stream.