Cable Fault Detector Machine TDR

Availability:

<p class="stock in-stock"></p>


Cable fault Location system (various technology)
The Cable Fault Locating System COMPAC 32 is used to perform DC high pot test, Pre-location of fault distance with the help of pre-locator unit and
Pin-point underground cable fault in acoustic method with the help of suitable Surge wave receiver and Pin-point sheath faults in power transmission and
distribution networks or service provider companies. Key features Operating Mode Surge, Arc / SIM, DC / Proof Test/ Pre-location and Sheath Fault
Pin-point location of cable faults in Low, Medium and High voltage cables by acoustic method.
Perform DC / Proof test up to 32 kV
DC Test Current 10/20mA
Burn test up to 32 kV – 60mA for short period
Surge Output voltage selectable in three ranges 8, 16 and 32 kV continuously variable
Full energy delivering capacity at each select range.
High Surge energy of 1000 Joules (optional 2000J)
Single Impulse and 1.5, 3 and 6 seconds intervals or as per customer request
Pre-location of cable faults distance with TDR, ICM, SIM/MIM & Decay mode.
Big LCD touchscreen color display.
Maximum measuring pre-location range up to 64km
Sheath fault location up to 8kV – 60mA
Protection Class – IP 54

Cable Fault Locator Machine TDR

Cable Fault Detector Machine TDR is used to measure exact fault location such as broken line, earthing, poor insulation, poor contact or cross faults, etc. This device is a time-domain reflectometer (TDR) that detects fault by observing reflected waveforms.

Every Tech Trivial Cable Fault Detector Machine gives you exactly what you need: accurate measurements, consistent, reliable performance, best possible safety, and best possible warranty available.

Features :

Type: Cable Fault Pre-locator

Display: LCD Color display

Standard:- EN 50399

Model No.: D1020

Small in size and lightweight

Easy to use and simple operation

Can measure maximum 64 km range

The manual testing function is also available

With the pen drive, it is easy to transfer data to a computer

Rechargeable lithium battery with 8 Hr. working

Sheath fault location up to 8kV – 60mA

Protection Class – IP 54

The BAUR cable fault locator portfolio of instruments and systems is applicable to all types of cables ranging from 1 kV to 500 kV and all types of cable faults such as:

  • Short circuit faults
  • Cable cuts
  • Resistive faults
  • Intermittent faults
  • Sheath faults

Fire testing according to EN 50399 generates data used to investigate flame spread, power generation, smoke formation, and burning droplets. These are important parameters from a fire risk perspective.

EN 50399 Electrical Cable Fault Detector is used to measure exact fault location such as broken line 

Frequently asked questions:-

what is fire testing equipment?

Fire test equipment are used by electric cable manufacturers to verify that the products comply with the relevant standards and in particular the new CPR regulation (Costruction Products Regulation) in force for all EU member states from 1 July 2013 

what is en 50399?

EN 50399 is a fire test method that generates data used to evaluate the fire characteristics of cables in terms of flame spread, power generation, smoke formation and burning droplets.

You can also check out our Machinery Products.

 

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Cable Fault Detector Machine TDR”

There are no reviews yet.