IEEE 1202 Bunched Cable Vertical Flame Propagation

IEEE 1202 Bunched Cable Vertical Flame Propagation

Specifications:-

Material:-SUS 304 Stainless Steel

Steel ladder type:-Standard / wide steel ladder

Combustion chamber:-(800±20) x (400±10) mm

Power Supply:-AC380V, 50HZ; power is 5KW

Power:-Electronic

Test Material:-Bundled wire and cable

Model Number:-D380

Dimension:-3200(L) * 2500(W) * 4500(H) mm

Combustion Gas:-Propane with a purity of 95%

Standard:-IEC 60332

Airflow rate:-(5000±500) L/min

Product Description

IEEE 1202 Bunched Propagation Testing Cable Vertical Flame Equipment

Application:-

IEC 60332 Bunched Cable Vertical Flame Propagation Testing Equipment and commodity inspection installed bundle wires or equipment is widely used in wire and cables are used to Cable Vertical Flame Propagation evaluate the ability of vertically to suppress flame vertical spread under specified conditions. This cable industry, colleges, and universities departments

The experimental with a length of (1000±100) mm, width device is a self-supporting chamber of (2000±100) mm the steel ladder and height of (4000±100) mm. The ground The circumference of a vent (300±30) mm x (1000±100) mm bottom of the test chamber. The distance between the back wall of the box above the test chamber is sealed, and the air flows into the chamber from an inlet of (800±20) mm x (400±10) mm, an open chamber. Thermal insulation from the ground and the Lowe heat transfer in the test chamber is 150 mm, at the rear of the top of the coefficient of 0.7Wm2K1 is adopted on the back wall and both sides of the lowest transverse gear of the steel ladder are (400±5) mm st part of the cable sample is about 100 mm from the ground.

Frequently Asked Questions:-

What is Vertical Flame Propagation?

It is designed to property length. This assesses the flame retardant IEEE 1202 Vertical Flame Propagation on a single cable Test for fire Lab’s cable testing capabilities vertical flame propagation forms part of The Cable.

What is Bunched Cable?

A cable and individual conductors In some containing a number of separate forms it consists virtually to each other and there secured. Thus each of two or more small cables laid tangent in section circles with the interstice solidly represents two or more tangents filled with the metal sheathing.

What is IEEE 1202?

It Standard Wire & Cable Standardization of cable flame for Flame-Propagation Testing of propagation manufacturers, distributors, and testing is beneficial to cable users.

D380 | IEC 60332 Bunched Cable Vertical Flame Propagation

You can also check out our more Machinery Products.