AC/DC True RMS Digital Multimeter with PC Interface – KM 829

Availability:

<p class="stock in-stock"></p>


Thi is AC/DC True RMS Digital Multimeter with PC Interface. It has 4 digit display and 4 years warranty.

0

(max file size 512 MB)

AC/DC True RMS Digital Multimeter with PC Interface – KM 829

Description:

  • A true (RMS men’s root mean square) is a tool RMS device that alternating can measure current (ac) or ac voltage
  • True RMS meter is the only one that can accurately widely used because it is a measure both sinusoidal non-sinusoidal patterns—spikes, pulse, and any other (Pure, without transitions between distortion, with symmetrical peaks and valleys) trains, squares, triangles, sawtooth, and (Waves with distorted, irregular ragged or angular waves) ac waveforms.
  • The Need waves are increased because the of True RMS meters of Non-sinusoidal possibility measurement.
  • In case like Electronic speed motors drives, solid ballasts, computers, HVAC, state environments, etc. in short pulses. Here true choice for taking where ac RMS this case current occurs in meter is measurements on power lines better characteristics are unknown.
  • Each industrial extreme level like drop, shock, humidity meter in Tech Trivial is tested to the, etc. Every MultiMate gives you exactly what Tech Trivial True Rams Digital Insulation you need: reliable best possible warranty performance, best possible safety accurate measurements, consistent, and available.

Service Details:

  • Model Number:-D28
  • Warranty:2 Year
  • Usage: AC, AC+DC True RMS
  • Height: 64.5 mm
  • Width: 103 mm
  • Auto power cut: yes
  • Weight: Approx. 635gm with holster
  • Battery: Single 9V
  • AC Voltage: 0.01 mV – 1000 V
  • Digit Display: 4 Digit
  • Accuracy: 0.08%
  • Operating Temperature: 0 – 45-degree Celsius DC Voltage
  • Depth: 208 mm

Special Features of AC/DC True RMS Digital Multimeter- KM 829:

  • PC Interface Capability
  • Data Hold
  • Relative Zero Mode
  • Beep-Jack Audible & Visible Input Warning
  • Auto-Ranging
  • Auto Check V-Ω
  • T1-T2 differential Temperature readings

Features –

  • DC Voltage Basic Accuracy 0.08%
  • AC; AC+DC True RMS Conversion Frequency
  • Fast Audible Continuity
  • + NCV & Probe-Contact EF-Detection
  • Bandwidth up to 20kHz (V) & 1kHz (A)
  • Fast Measurements, 5/sec; Fully Auto-Ranging
  • Logic Level Duty Cycle Readings & Diode Tester
  • Auto Power Off
  • dB function with 20 selectable values
  • + 4 Digit 10,000 counts large easy to read Backlight LCD display
  • + Record Max/Min readings, Auto Ranging
  • + Lo-Z volts to drain Ghost Voltages (Auto Check Feature)
  • Logic & Line Level Frequency

 

Specifications:

 

  • Sensing: AC, AC+DC True RMS
  • – Display: 9999 Counts: ACV, DCV, mA, A, Ohm & Capacitance Hz & nS 6000 Counts: mV, pA,
  • Update Rate:
  • + Temperature Coefficient: nominal 0.15 x (specified accuracy)/°C @ (0°C ~ 18°C or
  • Digital Display: 5 per second: 60 per second max nominal; 41 Segments Bar-graph
  • Low Battery: Below approx. 7V
  • – Operating Temperature: 0°C to 45°C
  • – Dimension: 208(L) x 103(W) x 64.5(H) mmnana plug type-K Thermocouple.
  • + Relative Humidity: Max. up to 31°C decreasing80% R H. for Temperature linearly to 50% R H. at 45°C
  • Pollution degree: 2
  • Power Consumption: 5mA typical
  • + Storage Temperature: -20°C to 60°C, <80% R H. (with battery removed)
  • 28°C ~ 45°C), or otherwise specified
  • APO Timing: Idle for 30 minutes
  • Altitude: Operating below 2000m
  • APO Consumption: 50 PA typical
  • Power Supply: Single 9V battery
  • Weight: Approx. 635gm with holster

OPTIONAL ACCESSORIES:

  • USB BMH-01 Magnetic interface kit BU-82X; Hanger;
  • BKB32 plug adaptor banana plug to type-K socket.
  • Current Clamp Adaptor CA500, Clamp CA300, Current
  • CA1000, CA2000, High Voltage Probe PD-28.