Natural Gas Safety Valve (Socket)
<p class="stock in-stock"></p>
Natural gas safety valve with a thermal device and quick connection. Available with a steel safety device (resistant up to 925 degrees), and with the brass safety device (resistant up to 650 degrees).
Also available without a thermal safety device.
Related products
-
General & Physical Tests
Vertical Cold Chamber upto -86 deg
0 out of 5(0)Cold chambers are and integral part of any cable test laboratory. They are helpful in performing cold bending, cold elongation and cold impart tests as per latest revision of IEC-60811 5 and 6 series. Techtrivial has many different designs and sizes for vertical cold chambers ranging from -15 degree Celsius to -86 degree Celsius.
SKU: n/a -
General & Physical Tests
Hot Air Bath (Underground, Above Ground all Size Possible)
0 out of 5(0)• The gap between the walls is filled up with special grade glass wool for proper
insulation to avoid heat losses.
• Temperature Control, Thermostat (Temperature accuracy +/- 3 Deg C)
• On/Off Control (Temperature accuracy +/- 2 Deg C)
• PID Control (Temperature accuracy +/- 1 Deg C)
• Microprocessor control (Temperature accuracy +/- 0.5 Deg C
• Please specify the kind of controller and accuracy required at the time of
ordering.
• Water Circulation
• Water circulation using separate motor or stirrer.
• Elements
• Heating elements are made of high quality heaters which are put inside the
water bath and placed at the bottom of the bathSKU: n/a -
General & Physical Tests
Horizontal Cold Chamber up to -86 deg
0 out of 5(0)Techtrivial designs and develop many ranges of cold chambers for cable and plastic compounding industry. Our range goes from -23 Degree Celsius to -86 degree Celsius where you can test not only servo cables with -15 degree Celsius operating temperature but also Arctic grade cables up to -86 degree Celsius.
SKU: n/a -
General & Physical Tests
100L High Temperature Constant Temperature Oil Bath
0 out of 5(0)100L High Temperature Constant Temperature Oil Bath is suitable for oil resistance test of plastics such as enameled wire and insulating covering. The test piece is immersed in the test oil at a predetermined temperature, and after a certain period of time tensile residual value is measured. It is in line with GB/T 2951 , GB/T 5023, GB/T 5013, UL, VDE, CSA, JIS and other standards.
SKU: n/a