Natural Gas Safety Valve (Socket)
<p class="stock in-stock"></p>
Natural gas safety valve with a thermal device and quick connection. Available with a steel safety device (resistant up to 925 degrees), and with the brass safety device (resistant up to 650 degrees).
Also available without a thermal safety device.
Related products
-
General & Physical Tests
Vertical Cold Chamber upto -86 deg
0 out of 5(0)Cold chambers are and integral part of any cable test laboratory. They are helpful in performing cold bending, cold elongation and cold impart tests as per latest revision of IEC-60811 5 and 6 series. Techtrivial has many different designs and sizes for vertical cold chambers ranging from -15 degree Celsius to -86 degree Celsius.
SKU: n/a -
General & Physical Tests
Cold Bend Test | Cold Impact Test
0 out of 5(0)IEC 60811-504 describes the cold bend test method for cables under low temperatures. The cold bend test on cable is only possible upto a maximum diameter of 12.5mm. The test is mainly conclusive to understand the flexibility and strength of plastic used over cable under low temperatures.
Whereas cold impact test on cables is performed according to IEC 60811-506. This test is mainly designed to simulate the plastic’s capacity to resist mechanical shock under cold environment.Here from a certain height, mandrels of specific weight are dropped on the cable.
SKU: n/a -
General & Physical Tests
100L High Temperature Constant Temperature Oil Bath
0 out of 5(0)100L High Temperature Constant Temperature Oil Bath is suitable for oil resistance test of plastics such as enameled wire and insulating covering. The test piece is immersed in the test oil at a predetermined temperature, and after a certain period of time tensile residual value is measured. It is in line with GB/T 2951 , GB/T 5023, GB/T 5013, UL, VDE, CSA, JIS and other standards.
SKU: n/a