Reaction to Fire EN 50399 compliant – for CPR Cables

220.000

Description

Reaction to Fire according to EN 50399. Buy the most in-demand technological setup among Cable manufacturers today. EN 50399 test machine. In 2016 EU parliament proposed and passed a regulation for Construction product Regulation, popularly known as CPR.
The objective is to regulate the use of construction material with higher safety awareness. Towards human, animal, ambient and entire Ecosystem.
Cable manufacturers norm is giving flexibility to each EU country to decide their own rating. The generic rating is A, B, C, D, E & F where cables are subject to the tests and observed for Reaction to fire.
There are basically three types of tests that are included in newly introduced norm EN-50575 as below listed.

1) EN-50399- Reaction to fire under control condition- This is an advanced extension to a very popular Bunched cable flame test according to IEC-60332-3. But of course, during this test, additional information like Heat release rate (HRR), Smoke release rate (SRR), Smoke density, Droplet count, burning rate, propagation rate, Gas analysis of O2, CO2 and CO etc are required to be recorded.

2) Halogen content % :- IEC-60754:- Additional instrument required.
3) Smoke density as per IEC-61034-included in this equipment.

Based on the above tests and results, Manufacturers of cables is required to mark their cable. With the appropriate category and rating of the cable such as B2Ca.
Tips:- For Cable manufacturers who design or develop new cables, it is very difficult to wait for a third party agency reports. To test the cable prototype design and then go further. It consists of several waiting time and costs causing delay in project.
Have your own CPR laboratory (our setup is also certified by third party laboratory) can help you save much money and time on development tasks.

logo of techtrivial

ASK US

You may also like…

  • Sale!
    Reaction to Fire Testing

    Flammability Test for Bunch Cables ( IEC 332 Pt 3 , BS EB 60332-3-10)

    • The Basic instrument consists of (On request CPR compliant is also available)
    • Test chamber of inside dimension width 1000 mm, depth of 2 mtr and height of 4 mtr.
    • The test chamber is made of 1.6 mm thick GI sheet (no rust).
    • An aperture as per specification.
    • An outlet of 300 x 1000 mm at the rear edge of …
  • Sale!
    Reaction to Fire Testing

    Halogen Gas Emission Test Apparatus as per IEC-60754

    • The instrument comprising of
    • Tubular Furnace for temp. up to 1000 o C +- 10 o C.
    • PID Digital Temp. Indicating Controller.
    • Digital Flow Indicator to monitor Air Flow with regulator
    • Quartz tube and Quartz boat for keeping samples – one each.
    • Gas Washing Bottles – 2 nos. Magnetic stirrer.
    • Set of entire Glass (laboratory grade) wares.
    • Ph Indicator …
  • Sale!
    Reaction to Fire Testing

    Fire Survival & Smoke density testing apparatus

    Fire Survival Test instrument:-
    This instrument is designed to testing cables for resistance to fire of cable required to maintain circuit integrity under fire conditions. The instrument is
    applicable to cables of rated voltage not exceeding 600/1000 V and of overall diameter less than or equal to 20mm (as per BS 6387) and diameter
    exceeding 20mm (as per BS 7846).
    The instrument is designed
    Test …