Power Transducer

Availability:

<p class="stock in-stock"></p>


This is Power Transducer wichi is used for accurate measurement of electrical parameters, remote monitoring & automation. It is offered in different specifications and it is also customizable.

(max file size 512 MB)

Service Details:

Accuracy: 0.2% RO at 23 degree +- 5 degree (Self-Power Mode 0.25% RO at 23 degree +- 5 Degrees’).

Input Burden: 0.1VA / 60Hz at 150V AC

Common mode rejection: > 120db: 50 / 60Hz

Model Number:-D153

Output Load: DC Current Mode: 10V DC Maximum

Input Over: Normal AC 110V Self-Power Mode 150V AC Maximum.

Input Range* Normal Voltage 110V Effective 50 ~ 150V*

Calibration SPAN and ZERO +- 10%

Features:

Confirming to IEC-688

Aux. Power 110/220V AC; Self Powered / DC 240 / 110 / 125 /85 ~ 265V available

High Dielectric Strength 2.6KVAC / Min

ABS Plastic Self – Extinguishing Case

High Accuracy 0.2% RO at 23 C± 5 C On request 0.5% available

Input Burden 0.3VAI 50Hz, Self-Power Mode 3VAI 50Hz for AC Current Transducer & 0.1VA 50Hz at 150V AC

High Impulse withstand voltage

Accuracy “D Series 0.2% RO at 23°C + 5°C

S” Series 0.5% RO at 23°C + 5°C (Sel-Power Mode 0.6% RO at 23°C £ 5°C)

Input Burden 0.3VAI 50Hz, Self-Power Mode 3VAI 50Hz for AC Current Transducer & 0.1VA 50Hz at 150V AC;

Frequency 45~ T0Hz

Output Load DC Current Mode: 10V DC Maximum, DC Voltage Mode : 10mA DC Maximum

Output Protection without Damage

Dialectic Strength 26KVAC /1 Min, between Input/ Power / Case

Impulse 5KV (1.2X50 us), ANSI C37 90a / 1983 DIN, IEC 255 – 4, IEC 688-1992

25KV – 0.25mS / MHz [EC 801-3 (Ring WAVE)

Common Mode Rejection > 120db, 50/ 60Hz

Stability <0.2% I Year

Response Time & Ripple(p-p) <400mS. 0~ 99%; 0.5% P-P (STD)

Calibration SPAN and ZERO + 10%

Temperature Coefficient <100ppm /°C from 0 ~ 60°C; <50ppm /23°C + 3C

Operating Condition -10°C ~ +65°C, 20 ~ 95% RH Non – Condensed

Magnetic Effect DIN- IEE 688 <0.005% Change 10″ Centre 100A-Tum

Storage Condition -40°C ~ +75°C, 20~ 95% RH Non – Condensed

Power Supply AC or DC +20%, 50/60Hz 1¢ 3VAIAC: 3¢ 3VA/AC

Aux. Power Effect <0.01% / V

 

Housing Material ABS Plastic, Self-Extinguishing to UL Subject 94 Class V-O Case IP 50 Snap Mounting on

DIN EN 50022-35 or Surface Mounting. Compliance with IEC 529, BS 5490, Din 40054 Protection

Touch-Proof Terminals and Enclosure Meeting Requirements of VBG 4 & VDE 0106 oars 100(Germany)

Mounting DIN Rail or Wall Mounting

Size 14 [SOWX 115HX73.4Lmm]; 3¢ [120WX 115H X 73.4L mm  For Voltage & Current Transducers

And [120W X 115H X 73.4L mm ] for other types of Transducers

“Sell-Power Mode Effective Range 5~ 150%, Output 0~XmA DC for AC Current Transducer Effective Range 85 ~ 150V,