Leakage Current Clamp Meter with Data Logging and PC Interface

Availability:

<p class="stock in-stock"></p>


This is a clamp meter with data logging and PC interface. It is used to measure leakage current. It has four digit display and 0.01mA resolution.

(max file size 512 MB)

This is a Leakage Current Clamp Meter with Data Logging and PC Interface. It is used to measure leakage current. It has a four-digit display and 0.01mA resolution.

Leakage Current Clamp Meter Technical Specifications:

  1. Measuring range: 30mA/300mA, 30A/300A
  2. LCD Dimension: 35mm x 21.5mm
  3. Range: 0.00mA -300.0A (50/60HZ)
  4. Test Mode: Clip-on CT, Integral mode.
  5. Resolution: 0.01mA
  6. Function: Measurement of AC leakage current, AC Current up to 300A
  7. Display Mode: 4 Digit LCD display.
  8. Display Size: 32mm x 15mm
  9. Jaw Size: 40mm
  10. Hold: Display shows the “DH” symbol.
  11. Peak Hold: Peak value capture and hold function
  12. Storage Temperature and Humidity: 10°C-60°C: below 70%rh
  13. Dimension: 64(W)mm x 160(H)mm x 23(T)mm
  14. Weight: Approx. 120g (with battery)
  15. Data Storage: 60 groups, “FU” symbol flickering means storage is full
  16. Battery Voltage: When battery voltage reduced to 2.5V – 2.7V, battery low voltage Line
  17. Sampling Rate: About 2times/s
  18. Voltage: Line test under AC 600 Volt

You can also check out our Automated Testing Products.