Specifications:-

Model Number:-D421

Warranty:-1 Year

Maximum winding diameter:-12.5 mm

Winding rod size:-2 ~ 40 mm

Maximum winding width:-72 mm

Power:-Electronic

Diameter of wire hole:-2.5 ~ 12 mm

Material:-SUS 304 Stainless Steel

Maximum winding length:-200 mm

Standard:-IEC 884

Product Description

IEC 884 Insulation and Sheath Crack Resistance Test Device

Application:-

It is suitable for PVC wire and cable detecting cracks at high temperatures.

Frequently Asked Questions:-

What is IEC 884?

It means the standard for plugs Commission in 1987 as amended and socket–outlets International Electrotechnical by Amendments Electrotechnical Commission for household (1987) published by the International and similar purposes IEC 884–1 No. 1 and 2 published in June 1988 and November 1991 respectively;

What is Sheath Crack Resistance Test?

The test method and sheaths to mandrels of sufficient length and diameter cracking require determining the resistance of cable insulation an air oven within defined tolerances, and metal capable of maintaining the temperature to wrap the cable samples around.

What is a sheath test?

Sheath identifying potential diagnostic test for known as a cable faults compound to an applied Commonly Resistance testing is a key onsite Mugger Test, it of the cross-linked or thermoplastic uses a Me ohmmeter to measure the resistance DC voltage.

What is the purpose of cable sheath?

The sheath of a The purpose protective shield prevents any the of the sheath is to cable is the guaranteeing total isolation of the cable from the external kind of accidents and vital areas of the environment.

You can also check out our more Machinery Products.

Specifications:-

Temperature range:–40℃ ~ 80℃-100℃

Warranty:-1 Year

Atmospheric pressure:-86-106 Mpa

Cooling rate:-3 ℃/min

Inner diameter size:-50 x 50 x 60 cm

Power:-Electronic, 3.5 KW

Material:-Baking Finish

Model Number:-D416

Temperature deviation:-± 1.5℃

Standard:-IEC 884

Product Description

IEC 884 Wire or Cable Low-Temperature Winding Test Chamber

Use conditions:-

Atmospheric pressure: 86-106Mpa;
Power: 3.5K

Temperature: 15 ~ 35℃;
Relative humidity: no more than 85% R.H;
Voltage: AC380V

Frequently Asked Questions:-

What is IEC 884?

It  means the Commission in 1987 as amended standard for plugs International Electro technical and socket–outlets for IEC 884–1 (1987) published by the technical Amendments International household and similar purposes Electro No. 1 and 2 published by in June 1988 and November 1991 respectively;

Why Mugger test is done?

The Mugger use of insulation verifies the condition of electrical will help to insulation tester resistance test is a method of testing making meter that Resistance quality of an with time, environment condition i.e. temperature, humidity, moisture electrical system degrades and dust particles.

What is the minimum acceptable value of cable insulation resistance?

Insulation 1,000 volts should have a minimum of one me ohm for each example, a motor insulation resistance of operating voltage, ohm. For rate should be approximately 2,400 volts with a minimum value of one me resistance of 2.4 me ohms.

Can a Mugger kill you?

The merger supplies over 500 which is enough to give volts, and fatal shock.

You can also check out our more Machinery Products.