Specifications:-

Glow Wire Test Dimension:-1200 (L) x 600 (W) x 1080 (H) mm

Chamber capacity:-0.5 m3

Material:-SUS 304 Stainless Steel

Model Number:-D374

Standard:-IEC 60695

Hot wire:-Made of nickel/chromium

Test Material:-Insulating/solid combustible materials

Thermocouple diameter:-0.5 mm

Heating current:-120 ~ 150 A

Timer range:-0 ~ 99.99 s

Product Description

IEC 60695 Glow Wire Test Apparatus

Application:-

Insulating materials or materials component through the wire, overload and bad contact that are prone to flame other solid some components will reach a certain combustible spread inside the equipment element. May be ignited by a hot wire or a burning such as the fault Under certain conditions current flowing temperature cause the nearby parts to ignite.

This testing machine thermal evaluates the ignition risk of such as stress caused by electrical insulation equipment and its heat source used to resist electrical burning element or overload in a short time. Applicable to electronic materials or other solid but also for solid components, combustible materials

 Test Principle:-

Heating ignition source It uses an electric wire test using flameless heating to make the heating wire touch a specified temperature, the tested sample.
Chamber capacity: 0.5 m3, width * depth * height: 950 * 600 * 900 (mm)
Outline size: 1200 (L) x 600 (W) x 1080 (H) mm

Hotwire: made of nickel/chromium with a then under test conditions, the diameter of 4mm.
Thermocouple: 0.5 mm thermocouple, which can withstand high temperatures of 1050℃.
Heating current: when the temperature diameter of the armored filament is 960℃, the current is between 120 ~ 150 A.
The force of the test is 0.8 ~ 1.2 N, and the penetration applied to depth is at least 7 mm.
Timer: ignition duration (Ti) and flame extinction time (Te).
Timer range: 0 ~ 99.99 s.
Outer box material: stainless steel

Frequently Asked Questions:-

What is IEC 60695?

It specifies a small-scale for materials, exposed to a non-metallic ignition small-flame behavior of specimens made comparing the relative burning laboratory screening procedure from plastic vertically or horizontally oriented and another source of 50 W nominal powers.

What is the Glow Wire Test?

It is performed spread of fire in the event of electrical devices. It assesses the plastic’s ability on plastic materials used to resist ignition. As a safety test, its electrical component’s purpose is to prevent and to self-extinguish if ignited the start or the becomes overheated.

What does IEC mean?

International Electro those standards for all electrical stands for the International prepare and publish international Electrotechnical: An “organization, electronic Commission IEC Commission and related technologies.”

You can also check out our more Machinery Products.

Specifications:-

Usage:-Testing

Standard:-IEC 60695, UL94

Model Number:-D357

Timer:-0 ~ 99.99 s arbitrary setting

Power:-500 W

Nozzle inner diameter:-0.375 inches (9.5mm)

Spray fire mode:-Automatic electronic fire

Test Material:-Plastics

Material:-Baking finish

The volume of test chamber:-≥ 0.5 m3

Dimension:-L1200 * W600 * H1260 mm

Product Description

 Description:-

Horizontal and for plastics is suitable for testing plastic combustion behavior conform parts to spread combustion the resistance of vertical Flammability Testing Equipment plastics and their under the condition measuring the residual flame of flame combustion. The horizontal by measuring the linear combustion rate The vertical to the standard requirements of the sample is evaluated by, combustion evaluated of the samples range and dropping. The design and manufacture of combustion particles of this instrument of GB/T2408, GB13488, ISO1210 and UL94

Technical Parameters:-

Nozzle diameter: 0.375); tube length inches (about 9.5mm 100mm;

Metal mesh: square, side length 125mm steel wires with the web plate is made of 0.45 for the diameter of 0.7mm.

The is greater than or test chamber to 0.5 m3 equal volume of the.

Outer box size: L1200 * W600 * H1260 mm, baking pain high-quality material t;

Spray fire mode: automatic electronic fire.

Timer: 0 ~ 99.99 s arbitrary setting. The working power of this device is AC220V, 50HZ, and the total power is 500W.

Frequently Asked Questions:-

What is IEC 60695?

It specifies a small-scale for comparing the relative burning laboratory screening procedure behavior of vertically or specimens made from horizontally oriented plastic and another non-metallic ignition source of 50 W nominal materials, exposed to a small-flame power.

What is the vertical flame test?

Under controlled to heat and flame is measured exposure, the flame source, and laboratory conditions, material response described A above a controlled flame and exposed for test specimen is positioned vertically a specified period of time. The following is removed.

What is a flammability test?

Flammability materials ignite how measure how easily burn and how quickly they test methods they react when burned. In, horizontal to removed, and then tests observe flammability continues if the material contrast calculates the rate at which the specimen burn after the test flame is burning.

What is a flammability test for fabrics?

Flammability a material or finished or burn when determines how product wills testing ignite easily exposed to or used near fire or heat.

D357 | IEC 60695 | ul94 Horizontal and Vertical Flammability Testing Equipment For Plastics

You can also check out our more Machinery Products.