Cable Fault Pre-Locator

Sun, 08 Aug 2021 08:20:48 +0000

Cable Fault Pre-Locator are generally used in cable manufacturing or cable installation sites for easy detection of short circuit between cores or core to shield as well as for is continuity in a core. The principal of working for such LV Cable Fault Pre-Locator is based on TDR and bridge and Capacitance-resistance of the cores.

Service Details:

Display Readout: Color LCD 480*280

Power Supply: 7.4V Rechargeable Li-ion battery Charging voltage 230V +/-10%, 50Hz, single phase

Model Number:-D172

Continued Operating Time|: 8 hours

Working Temperature: -15~ + 55 degree Celsius RH less than 85%RH.

Features:

With 4 GB USB Pen drive

Tests any type of copper telecom and signal cables Measurement maximum 8 km in selectable ranges

Menu-driven simple operation Colour LCD Display (480 x 280 dots)

Automatic testing mode

Range, VOP, and Gain are selected automatically.

With test insulation resistance mega meter it enables and loop resistance.

Six function keys and simple operation.

The manual testing function is also available.

Both pulse reflection and intelligent bridge testing for open, short, or low insulation cable faults.

Continued 8 hours operating time on internal battery

Rugged construction and easy to carry on site

Rechargeable lithium battery with intelligent charger

GENERAL SPECIFICATIONS:

Display Readout: Colour LCD: 480°280-

Charging time: 3 hours

Power Supply: 7.4V Rechargeable Li-on battery Charging voltage 230V +/10%, 50Hz, single phase.

Continued operating time: 8 hours

Working Temperature: -15°C ~ + 5°C; RH <85%RH.

Dimension: 212 (L) x 170 (W) x 90 (H) mm (approx.)

Storage Temperature: -15°C ~ + 55°C; RH <85%RH.

Weight: 1.20 Kg Net (approx.)

You can also check our Machinery Products.

D172 - Tech Trivial

Cable Fault Pre-Locator