Service Details:

Display Readout: Color LCD 480*280

Power Supply: 7.4V Rechargeable Li-ion battery Charging voltage 230V +/-10%, 50Hz, single phase

Model Number:-D172

Continued Operating Time|: 8 hours

Working Temperature: -15~ + 55 degree Celsius RH less than 85%RH.

Features:

With 4 GB USB Pen drive

Tests any type of copper telecom and signal cables Measurement maximum 8 km in selectable ranges

Menu-driven simple operation Colour LCD Display (480 x 280 dots)

Automatic testing mode

Range, VOP, and Gain are selected automatically.

With test insulation resistance mega meter it enables and loop resistance.

Six function keys and simple operation.

The manual testing function is also available.

Both pulse reflection and intelligent bridge testing for open, short, or low insulation cable faults.

Continued 8 hours operating time on internal battery

Rugged construction and easy to carry on site

Rechargeable lithium battery with intelligent charger

GENERAL SPECIFICATIONS:

Display Readout: Colour LCD: 480°280-

Charging time: 3 hours

Power Supply: 7.4V Rechargeable Li-on battery Charging voltage 230V +/10%, 50Hz, single phase.

Continued operating time: 8 hours

Working Temperature: -15°C ~ + 5°C; RH <85%RH.

Dimension: 212 (L) x 170 (W) x 90 (H) mm (approx.)

Storage Temperature: -15°C ~ + 55°C; RH <85%RH.

Weight: 1.20 Kg Net (approx.)

You can also check our Machinery Products.

Cable Fault Detector Machine TDR is used to measure exact fault location such as broken line, earthing, poor insulation, poor contact or cross faults, etc. This device is a time-domain reflectometer (TDR) that detects fault by observing reflected waveforms.

Every Tech Trivial Cable Fault Detector Machine gives you exactly what you need: accurate measurements, consistent, reliable performance, best possible safety, and best possible warranty available.

Features :

Type: Cable Fault Pre-locator

Display: LCD Color display

Standard:- EN 50399

Model No.: D1020

Small in size and lightweight

Easy to use and simple operation

Can measure maximum 64 km range

The manual testing function is also available

With the pen drive, it is easy to transfer data to a computer

Rechargeable lithium battery with 8 Hr. working

Sheath fault location up to 8kV – 60mA

Protection Class – IP 54

The BAUR cable fault locator portfolio of instruments and systems is applicable to all types of cables ranging from 1 kV to 500 kV and all types of cable faults such as:

• Short circuit faults
• Cable cuts
• Resistive faults
• Intermittent faults
• Sheath faults

Fire testing according to EN 50399 generates data used to investigate flame spread, power generation, smoke formation, and burning droplets. These are important parameters from a fire risk perspective.

EN 50399 Electrical Cable Fault Detector is used to measure exact fault location such as broken line 

Frequently asked questions:-

what is fire testing equipment?

Fire test equipment are used by electric cable manufacturers to verify that the products comply with the relevant standards and in particular the new CPR regulation (Costruction Products Regulation) in force for all EU member states from 1 July 2013 

what is en 50399?

EN 50399 is a fire test method that generates data used to evaluate the fire characteristics of cables in terms of flame spread, power generation, smoke formation and burning droplets.

You can also check out our Machinery Products.